Lino-Window

For projects where temperature control matters, a thermally broken steel system adds an insulating barrier between the interior and exterior portions of the frame. This helps reduce heat transfer through the steel and improves the overall thermal performance of the window.

It can be especially useful in hot climates, cold climates, and areas with significant temperature changes throughout the year. The result is a more comfortable interior and a better-performing window without giving up the slim steel profile.

Custom dimensions based on your project. Send us your rough opening or architectural drawings and we'll help determine the appropriate window dimensions.

Choose from available insulated, laminated, Low-E, or other glazing options depending on the application and profile system.

Available with different grid configurations, including SDL (simulated divided lites) or TDL (true divided lites) where supported by the selected system.

Available as fixed, casement, tilt & turn, awning, pivot, or transom configurations depending on the design and profile system.

Powder-coated finishes available in a range of colors, including custom RAL colors.

We finish in TIGER Drylac architectural powder coating. It is applied dry and cured in an oven, so the coating cross-links into a single hard thermoset shell bonded to the steel rather than a paint film sitting on the surface. There is no solvent to flash off and no seam for moisture to work under.

The architectural-grade series are built for exterior exposure: they hold color and gloss against UV, resist chalking, salt spray, and cleaning chemicals, and stay flexible enough not to chip at edges and corners. On a properly prepared and coated window that means a finish measured in decades — the architectural series carry long-term exterior performance ratings in the 25-year range rather than the few years typical of wet-painted steel.

Hardware is selected based on the window operation and profile system — casement levers, tilt & turn handles, stays, and hinges.

Made-to-order production. Lead time runs 10–14 weeks depending on the volume of the order and how complex it is.